vsftpd-1.1.3配制实例之一：INTERNET_SITE

This example shows how you might set up a (possibly large) internet facing FTP site. The emphasis will be on security and performance. We will see how by integrating vsftpd with xinetd, we get a powerful combination. Step 1) Set up your xi

　　This example shows how you might set up a (possibly large) internet facing
　　FTP site.
　　The emphasis will be on security and performance.
　　We will see how by integrating vsftpd with xinetd, we get a powerful
　　combination.
　　Step 1) Set up your xinetd configuration file.
　　An example xinetd configuration file "vsftpd.xinetd" is supplied.
　　To install it:
　　cp vsftpd.xinetd /etc/xinetd.d/vsftpd
　　Let's look at the important content in this file and see what it does:
　　disable = no
　　socket_type = stream
　　wait = no
　　This says that the service is active, and it is using standard TCP sockets.
　　user = root
　　server = /usr/local/sbin/vsftpd
　　The server program /usr/local/sbin/vsftpd is used to handle incoming FTP
　　requests, and the program is started as root (vsftpd will of course quickly
　　drop as much privilege as possible). NOTE! Make sure that you have the vsftpd
　　binary installed in /usr/local/sbin (or change the file path in the xinetd
　　file).
　　per_source = 5
　　instances = 200
　　For security, the maximum allowed connections from a single IP address is 5.
　　The total maximum concurrent connections is 200.
　　no_access = 192.168.1.3
　　As an example of how to ban certain sites from connecting, 192.168.1.3 will
　　be denied access.
　　banner_fail = /etc/vsftpd.busy_banner
　　This is the file to display to users if the connection is refused for whatever
　　reason (too many users, IP banned).
　　Example of how to populate it:
　　echo "421 Server busy, please try later." > /etc/vsftpd.busy_banner
　　log_on_success += PID HOST DURATION
　　log_on_failure += HOST
　　This will log the IP address of all connection attempts - successful or not,
　　along with the time. If an FTP server is launched for the connection, it's
　　process ID and usage duration will be logged too. If you are using RedHat
　　like me, this log information will appear in /var/log/secure.
　　Step 2) Set up your vsftpd configuration file.
　　An example file is supplied. Install it like this:
　　cp vsftpd.conf /etc
　　Let's example the contents of the file:
　　# Access rights
　　anonymous_enable=YES
　　local_enable=NO
　　write_enable=NO
　　anon_upload_enable=NO
　　anon_mkdir_write_enable=NO
　　anon_other_write_enable=NO
　　This makes sure the FTP server is in anonymous-only mode and that all write
　　and upload permissions are disabled. Note that most of these settings are
　　the same as the default values anyway - but where security is concerned, it
　　is good to be clear.
　　# Security
　　anon_world_readable_only=YES
　　connect_from_port_20=YES
　　hide_ids=YES
　　pasv_min_port=50000
　　pasv_max_port=60000
　　These settings, in order
　　- Make sure only world-readable files and directories are served.
　　- Originates FTP port connections from a secure port - so users on the FTP
　　server cannot try and fake file content.
　　- Hide the FTP server user IDs and just display "ftp" in directory listings.
　　This is also a performance boost.
　　- Set a 50000-60000 port range for passive connections - may enable easier
　　firewall setup!
　　# Features
　　xferlog_enable=YES
　　ls_recurse_enable=NO
　　ascii_download_enable=NO
　　async_abor_enable=YES
　　In order,
　　- Enables recording of transfer stats to /var/log/vsftpd.log
　　- Disables "ls -R", to prevent it being used as a DoS attack. Note - sites
　　wanting to be copied via the "mirror" program might need to enable this.
　　- Disables downloading in ASCII mode, to prevent it being used as a DoS
　　attack (ASCII downloads are CPU heavy).
　　- Enables older FTP clients to cancel in-progress transfers.
　　# Performance
　　one_process_model=YES
　　idle_session_timeout=120
　　data_connection_timeout=300
　　accept_timeout=60
　　connect_timeout=60
　　anon_max_rate=50000
　　In order,
　　- Activates a faster "one process per connection" model. Note! To maintain
　　security, this feature is only available on systems with capabilities - e.g.
　　Linux kernel 2.4.
　　- Boots off idle users after 2 minutes.
　　- Boots off idle downloads after 5 minutes.
　　- Boots off hung passive connects after 1 minute.
　　- Boots off hung active connects after 1 minute.
　　- Limits a single client to ~50kbytes / sec download speed.
　　Step 3) Restart xinetd.
　　(on RedHat)
　　/etc/rc.d/init.d/xinetd restart
　　If you run into problems, check:
　　1) Your /etc/xinetd.d directory only has one FTP service.
　　vsftpd.conf
　　# Access rights
　　anonymous_enable=YES
　　local_enable=NO
　　write_enable=NO
　　anon_upload_enable=NO
　　anon_mkdir_write_enable=NO
　　anon_other_write_enable=NO
　　# Security
　　anon_world_readable_only=YES
　　connect_from_port_20=YES
　　hide_ids=YES
　　pasv_min_port=50000
　　pasv_max_port=60000
　　# Features
　　xferlog_enable=YES
　　ls_recurse_enable=NO
　　ascii_download_enable=NO
　　async_abor_enable=YES
　　# Performance
　　one_process_model=YES
　　idle_session_timeout=120
　　data_connection_timeout=300
　　accept_timeout=60
　　connect_timeout=60
　　anon_max_rate=50000
　　vsftpd.xinetd
　　# vsftpd is the secure FTP server.
　　service ftp
　　{
　　disable = no
　　socket_type = stream
　　wait = no
　　user = root
　　server = /usr/local/sbin/vsftpd
　　per_source = 5
　　instances = 200
　　no_access = 192.168.1.3
　　banner_fail = /etc/vsftpd.busy_banner
　　log_on_success += PID HOST DURATION
　　log_on_failure += HOST
　　}
　　
　　

声明：本网页内容旨在传播知识，若有侵权等问题请及时与本网联系，我们将在第一时间删除处理。TEL:177 7030 7066 E-MAIL:11247931@qq.com